Monderma Imperial AMB Filters – Pack of 4
Monderma Imperial AMB Filters – Pack of 4
🛡️ Garantie 12 months — voir conditions
Imperial AMB Filter – Advanced Double Barrier Technology, NSF Certified
Made in the USA, the Imperial AMB filter combines a microporous ceramic outer shell infused with colloidal silver with a compressed activated carbon block and zeolite inner core.
This hybrid technology forces the water to successively pass through two distinct filter barriers : a first physical ceramic barrier, then a second dense and microporous carbon block barrier.
This design makes it possible to obtain more homogeneous and more stable filtration over time than a system using only granulated activated carbon.
Performance tested independently by Envirotek Laboratories, Inc. according to NSF/ANSI protocols 42 and 53.
Why choose the AMB version?
Unlike the Imperial GF version, which contains granulated activated carbon, the AMB version integrates a real block of compressed activated carbon inside the ceramic shell.
The advantages of the carbon block AMB
- Prolonged contact time between water and activated carbon
- Reduction of preferential paths taken by water
- More homogeneous filtration than with granulated activated carbon
- More regular performance over the duration of use
- Better stability of the media filtering over time
- Constant adsorption over the entire thickness of the carbon block
The flow rate of the AMB filter is deliberately controlled in order to optimize the contact time of the water with the different filter media. A white tube supplied with the filters allows the flow to be increased when necessary.
A true double barrier technology
An advantage often ignored: the water passes through two successive microporous structures
In the Imperial AMB filter, water does not pass through a single filter media. It must successively pass through two thick porous structures.
It first encounters the microporous ceramic outer shell, which constitutes a first physical barrier against particles and suspended matter.
The water then passes through the compressed activated carbon block, the structure of which also contains an extremely fine network of interconnected pores. These micropores offer a large internal surface intended for the adsorption of chemical contaminants.
This architecture creates a cascade filtration:
- the ceramic constitutes the first physical barrier;
- the carbon block forms a second dense and microporous barrier;
- the contaminants having passed through the ceramic encounter a second level of treatment;
- the ceramic limits the arrival of particles in the carbon block;
- the pores and adsorption sites of the activated carbon are better protected against premature clogging.
The two barriers complement and protect each other: the ceramic protects the carbon block, while the carbon block ensures a second stage of filtration and adsorption.
1. A high-performance ceramic shell
- Microporous mineral structure
- High-precision mechanical filtration
- First physical barrier against fine particles
- Protection of the carbon block against sediment
- Cleanable exterior surface
- Impregnated structure colloidal silver
2. A block core of compressed activated carbon
- Second dense and microporous filtering structure
- Advanced adsorption of chemical contaminants
- Prolonged contact time with water
- Reduction of preferential passages
- More homogeneous filtration than with granulated activated carbon
- More constant performance during lifespan
A compact design with more filter material
A compact Imperial size of only 7 inches
The Imperial AMB filter measures only 7 inches in height with a diameter of 2.75 inches. This relatively short and wide shape allows a large quantity of filter material to be concentrated in a compact element.
In the upper tank of a gravity fountain, its reduced height allows it to remain largely surrounded by water for a greater part of the filtration cycle.
When the water level begins to decrease, a significant proportion of the exterior surface of the filter can thus remain immersed for longer than with a larger element. top.
The hydrostatic pressure depends mainly on the height of water present in the tank. The compact format therefore does not artificially create more pressure, but it makes it possible to better exploit the available water column and to maintain a larger submerged filter surface.
A ceramic approximately 30% thicker than that of the FTO+
According to our comparative measurements, the ceramic shell of the Imperial AMB filter is approximately 30% higher than Coldstream FTO+ filter.
This additional thickness increases the depth of the first microporous barrier crossed by the water.
- Longer journey through the ceramic structure
- Deeper physical barrier against particles
- More robust structure during surface cleaning
- Reinforced protection of the carbon block internal
- Reduction of premature clogging by sediment
A carbon block approximately 40% thicker than that of the Black Berkey®
According to our comparative measurements, the wall of the compressed activated carbon block of the Imperial AMB has a thickness approximately 40% greater than that of the filter wall of a Black element Berkey®.
As the water is forced to pass through the entire thickness of the carbon block, this design promotes:
- a longer path through the pores of the activated carbon;
- a prolonged contact time with the filter media;
- a large internal adsorption surface;
- better filtration homogeneity ;
- a reduction in preferential passages;
- reinforced stability of performance over time.
Two thick barriers which complement each other
The advantage of the Imperial AMB filter is not based solely on the combination of two different materials. It is based on the succession of two real, very thick filter walls :
- an outer shell in microporous ceramic, approximately 30% thicker than that of the Coldstream FTO+;
- an internal block of compressed activated carbon, the wall of which is approximately 40% thicker than that of a Black Berkey® element.
The water must thus pass successively through the ceramic then through the entire thickness of the carbon block before reaching the lower tank.
This design favors filtration depth, contact time and performance stability rather than an artificial flow rate rapid.
The thickness deviations indicated are established from comparative measurements carried out on the Imperial AMB, Coldstream FTO+ and Black Berkey® elements. Slight variations may exist depending on manufacturing tolerances.
Filtration performance
The Imperial AMB filter has been independently tested according to the applicable protocols of NSF/ANSI Standards 42 and 53.
- >99% reduction in chloramines
- >99% reduction in chlorine
- >99% lead reduction
- 98% reduction in heavy metals
- 98% reduction in THMs – trihalomethanes
- 98% reduction in VOCs – volatile organic compounds
- 98% reduction in glyphosate
- 98% reduction in pesticides and herbicides
- 99% reduction in pharmaceutical compounds tested according to NSF/ANSI protocol 401
- 99% reduction in PFOA and PFOS
- 99% reduction in microplastics
- 95% reduction in PFAS
- 94% reduction in radionuclides
- 92% reduction in nitrates
- 92% reduction in tested fluorides: fluorosilicic acid, sodium fluorosilicate and sodium fluoride
Technical specifications
- Manufactured: USA
- Technology: microporous ceramic, compressed activated carbon block and zeolite
- Use: gravity filtration systems only
- Height: 7 inches
- Diameter: 2.75 inches
- Advertised absolute filtration: 0.5 micron
- Advertised efficiency: >99.9% at 0.2 micron
- Cleanable ceramic exterior surface
- Indicative capacity : up to 6,000 liters for two filters
- Indicative autonomy: up to 12 months for two filters
- Meets the material requirements of the NSF standard 42
Indicative flow rates
- Approximately 2 liters in 30 minutes
- Approximately 4 liters in 2 hours
- Beyond this volume, the flow gradually slows down
- Then count approximately 5 additional hours for the last liters
💡 Our advice for having filtered water more quickly
For more comfortable daily use:
- Completely fill the upper tank.
- After about two hours, collect the first four liters of filtered water in glass or stainless steel bottles.
- Place the bottles in the refrigerator so that you have a reserve of fresh water.
- Refill the upper tank as many times as necessary.
For complete filtration of a total fill, allow approximately 8 hours.
Care of the ceramic
The exterior ceramic surface can be cleaned when a decrease in flow is observed.
Remove the filter from the fountain, then gently clean the surface under cold water using a clean, non-abrasive sponge. Do not use soap, chemicals or detergents.
This cleaning removes particles accumulated on the surface of the ceramic and restores part of the initial flow.
Compatibility
The Imperial AMB filter is compatible with the majority of gravity filtration systems using a standard 2.75 inch format:
- Monderma Water Filters
- Berkey®
- British Berkefeld®
- Phoenix®
- ProOne®
- Other gravity systems compatible with the 2.75 inch format
Important
The Imperial AMB filter is designed exclusively for the filtration of cold water in gravity systems operating without pressure.
It must not be used with hot water or connected to a water network under pressure. pressure.
When water comes from a well, a source or a microbiologically unknown origin, a preliminary analysis of the water as well as appropriate disinfection may be necessary.
Performance and duration of use may vary depending on the quality of the water, the concentration of contaminants, the frequency of filling and the maintenance conditions.