Coldstream filter

The COLDSTream filter is a filtration system and purification of water to be connected to your tap. It offers in particular a very strong reduction in nitrate and water fluoride. This system allows you to filter water directly from the tap. An integrated bypass valve allows you to filter only cold water that comes out of your tap. Not suitable for hot water.

The kit contains:

• High quality 304 self -supporting steel body, adapts perfectly to your sink.
• A stainless steel fitting and a white plastic connection hose that fix a standard tap.
• An M24X100 adapter.
• A max filter. The system is also compatible with CTO+ and Sentry filters.

The system is approximately 33 cm high with a fingerprint diameter of about 7.5 cm.

The ceramic water filtration systems under the Coldstream counter are practical and discreet. You can also take them easily with you in your second residence or vacation place.

The Coldstream Max water purifier has an additional ceramic external layer to eradicate water viruses, providing protection against water pollutants.

The system contains everything you need to enjoy safe, healthy and tasty water directly from your water tap. Coldstream systems are among the most affordable on the market, but offer the best performance, as evidenced by our tests, but also independent tests carried out by third parties.

The taps, the filter case and the supports are all made of high quality stainless steel and the kit is supplied with all the elements - mounting supports, pipes, valves and fittings, necessary for a simple and easy installation on a pipe D '15 mm water.

The Coldstream water filter system is available with a choice of filters to adapt to all running water environments, providing safe, healthy and tasty drinking water all over the world.

Coldstream MAX filter duration: 3000 liters or 6 months. cost price 1cts per liter.

Advantages of the Coldstream filter:

• For tasty and safe drinking water
• Mineral salts and healthy electrolytes remain in the water
• Water pollutant protection
• Filter replacement indicator
• No required power supply
• 6 month filter lifespan
• Filters can be cleaned

Tests and verification

Coldstream was successfully tested according to the following standards and methods:

• NSF/ANSI 42 aesthetic effects
• NSF/ANSI 53 Health effects
• NSF P231 microbiological purifier
• USA EPA Method 200.8 Determination of metals and traces in water and waste
• Method 505-2.1 of the United States EPA Analysis of organic pesticides and commercial products based on polychlorine biphenyls (PCB) in water
• USA EPA Method 508.1-2 Chlorinated, herbicides and organohalogenures in water by GCECD
• USA EPA Method 515-2 chlorinated acids
• USA EPA 524-2 Method measurement of organic compounds purge in water
• USA EPA 525-2 method organic compounds in drinking water
• USA EPA MESTHOD MS301 (A) A colorimetric test based on an indicator strip for nitrates (No3) in water and soil.

Their laboratory complies with all procedures and requirements for laboratory certification and quality control set out in NjAC 7:18; Subpart 55-2 of the NYCRR, the standards of the National Institute Environmental Laboratory Accreditation Conference (NELAC) and the ISO 17025 standard.

The filters were tested using a COLDSTream system according to NSF/ANSI 42, 53 and P231 standards for the reduction of listed substances.

The reduction in the concentration of substances in water has been reduced to a value less than or equal to the water limit leaving the system, as specified in NSF/ANSI 42, 53 and P231 standards.

To ensure that our Coldstream products meet high and constant standards, Coldstream has set up a series of strict quality control procedures.

Finished filters are regularly tested to determine the size of the pores, the flow, the bubble point and the compression resistance, confirming that each batch will work perfectly.

In addition to that, the effluent water they produce is subject to a sensory evaluation and chemical tests to ensure that all the contaminants have been eliminated.

99.9 % elimination particles of class 1 of particle reduction, including microplastics.
Bacteria 99.9999 % elimination of bacteria and cysts* like E. Coli, Shigella, Cryptosporidium and Giardia.
Chemicals 99.9 % elimination of volatile organic chemicals*, nitrates, nitrites, chlorine and chloramine.
Heavy metals 99.9 % elimination of heavy metals, including lead and mercury. For the elimination of arsenic *, see the technical performance sheet.
99.99% elimination virus Viruses and microorganisms causing diseases, such as rotavirus.
Pesticides and herbicides 99.9 % elimination of pesticides and herbicides, including DDT.
Drugs 99.9% elimination of pharmaceutical products.
Fluor: 99.9% elimination

See the analysis table

The Coldstream MAX filter contains a replacement indicator

The single filter replacement indicator is indicated on the packaging

The external blue ceramic layer contains antimicrobial properties that facilitate the filtration process.

When the filter is cleaned, the blue layer is removed until the white ceramics are exposed, which indicates that the time of change has arrived.