BERKEY SYSTEMS
PF-2 - Berkey Filter for Fluorine, Arsenic and heavy metal ions
PF-2 - Berkey Filter for Fluorine, Arsenic and heavy metal ions
Unable to load pickup service availability
Berkey PF-2™ Fluoride and Arsenic Reduction Filters are manufactured and assembled in the USA. Berkey PF-2™ Fluoride and Arsenic Reducing Elements* adsorb the following undesirable elements found in drinking water:
Fluoride: sodium fluoride, sodium fluorosilicate, fluorosilicic acid (aka hydrofluorosilicic acid)
Arsenic: V and pre-oxidized Arsenic III
Other residual heavy metal ions
Made from safe, non-leaching #5 polypropylene, BPA free.
Sold in sets of 2
Berkey PF-2™ Fluoride and Arsenic Reduction Elements are designed for use only with Black Berkey® Purification Elements
Attach to the bottom of the Black Berkey® Purification Elements and sit in the lower chamber of the Berkey unit
The number of Berkey PF-2™ elements in the lower chamber must match the number of Black Berkey® purification elements in the upper chamber; for example, 4 Black Berkey® purification elements would require 4 PF-2 filters
Set of 2 Berkey PF-2™ elements to be replaced after 3785 liters of use
Berkey PF-2™ Fluoride and Arsenic Reduction Elements are backed by a six-month warranty.
**The proprietary fluoride reduction media is a new, improved, high-performance aluminum oxide, specially formulated for the removal of fluoride and arsenic from drinking water. Proprietary Fluoride Reduction Medium is an EPA-approved method for removing fluoride.
Share
very good, washing is a little laborious
Nothing to say, I'm waiting a few more weeks to test but for now nickel maybe a little problem when the second bottle is filled and if the other one above is filled it can leak between the two and leak so remember not to overfill them anyway, especially the one at the top
Good morning,
Thank you for leaving a review on our Berkey PF-2™ Filter product. We are delighted to know that you are satisfied so far. To avoid any overflow between the two tanks, we recommend that you fill the upper tank by a third when the lower tank is not empty. For example, if the lower tank is two-thirds full, fill the upper tank one-third full. Otherwise, wait until the lower tank is completely empty before filling the upper tank completely; this will optimize the efficiency of the filters.
Thank you for your trust in our product.
Sincerely,
Customer service
Very good as a filter!!!
I am delighted to see the good taste of the water
As for the effectiveness of the filters, I am not able to measure it.
PF-2 - Berkey Filter for Fluorine, Arsenic and heavy metal ions